Firstly, the claw pulley at any concave transition point of the conveyor belt. Practice has proven that the lateral strength of the steel rope conveyor belt is insufficient. When starting, the repulsion pulley causes excessive force on the conveyor belt locally, leading to tearing of the conveyor belt. Changing the umbrella part of the belt pulley to a belt pulley can completely solve this problem.
Secondly, improve the industrial conveyor belt hopper. Improving the industrial conveyor belt hopper is one of the effective measures to prevent early damage to the conveyor belt. Improve the hopper at the transfer point of each belt conveyor to increase its ability to pass through foreign objects by 2.5 times. Long and large foreign objects are less likely to get stuck between the funnel wall and the conveyor belt during transportation, reducing the probability of foreign objects tearing the conveyor belt. The guide skirt at the hopper makes the gap between it and the conveyor belt increase along the direction of conveyor belt operation, solving the problem of coal blocks and gift blocks getting stuck between the conveyor belt and the language board, and eliminating the damage caused by this. For hopper with a large drop, install buffer baffles internally to avoid direct impact of materials on the conveyor belt
