Corrugated Sidewall Conveyor Belt
Qingdao Best Friend Rubber & Plastic Co., Ltd. is one of the most reliable manufacturers and suppliers of corrugated sidewall conveyor belt in China, also supports customized service. If you're going to buy high quality corrugated sidewall conveyor belt made in China, welcome to get more information from our factory.
The corrugated sidewall conveyor belt is specifically designed for high-angle or vertical transportation. It mainly consists of a base belt, sidewalls, and cleats, which prevent materials from sliding during transport, providing an efficient, continuous, and space-saving solution.
Technical Detail
|
Name |
Corrugated Sidewall Conveyor Belt |
|
Belt Strength |
250-10000N/mm |
|
Belt Width |
300-2400mm |
|
Cleat |
55-600mm |
|
Sidewall |
40-630mm |
|
Bonding Method |
Hot vulcanization |
|
Adhesion |
＞17N/mm |
|
Conveying Angle |
0°-90° |
|
Cleat Type |
C, T, TC, TC-XS |
|
Certification |
ISO 90001 |
Product advantages of corrugated sidewall conveyor belt
1. Strong ability for large-angle transportation
It can achieve steep-angle conveying from 0° to 90°. For the same lift height, it reduces the floor space by 50%.
2. Wide application range
Thanks to its high load-bearing capacity and impact resistance, it can be used in various industries such as mining, ports, construction, metallurgy, cement, tunneling and steel plants
3. Reliable structure
Hot vulcanization technology is used to bond the base belt, sidewalls, and cleats, ensuring high bonding strength, no detachment during use, smooth operation, and a longer service life.
4. Cost reduction
One single unit can replace multi-stage conveying equipment, cutting the fault points by over 50%. Reduce the later maintenance cost by 70%.
Long-term Maintenance Guide
1. Regularly inspect the adhesion between the sidewalls and cleats.
2. Regularly check for belt misalignment or sidewall tearing.
3. Avoid starting under load. Only stop the machine after all materials have been discharged.
4. It is recommended to perform preventive maintenance every 3 to 6 months.
FAQ
Q: Can you provide third-party quality certification for this conveyor belt?
A: Our conveyor belt has passed the ISO 9001 quality management system certification.
Q: Can customized solutions be provided for specific working conditions?
A: Yes, belting calculation is always provided based on datas of job site to secure the most suitable specification.
Q: After the products arrive, which aspects should we focus on checking?
A: During acceptance, you should carefully verify whether the base belt, sidewalls, cleats, etc., are consistent with the drawings; check the cover rubber surface for bubbles, cracks, etc.; and confirm that the belt length is sufficient.
Q: The conveyor belt runs off-track severely. What are the common causes?
A: Off-tracking usually occurs due to an uneven frame, non-parallel rollers, or insufficient lateral rigidity of the base belt. Our conveyor belt features a lateral rigidity layer, which significantly reduces off-tracking caused by its own deformation.
Q: What type of conveyor belt can be selected for transporting hot materials?
A: For hot materials, a heat-resistant sidewall conveyor belt should be chosen. Also note that the sidewall and cleat materials must be heat-resistant as well.
Hot Tags: corrugated sidewall conveyor belt, China corrugated sidewall conveyor belt manufacturers, suppliers, factory, single sidewall conveyor belt, MOR Sidewall Conveyor Belt, construction sidewall conveyor belt, customizable sidewall conveyor belt, double sidewall conveyor belt, bulk material sidewall conveyor belt
You Might Also Like
Send Inquiry