
CFW Conveyor Belt
- Warp tensile strength: 240-610 N/mm, elongation at break ≥14%
- Weft tensile strength: 75-115 N/mm, elongation at break ≤40-45%
- Low permanent elongation: stable belt length, fewer take-up adjustments, less sag and belt deviation
- Strong fabric-rubber bonding: resists delamination and blistering under heavy cyclic impact
- Smoother carcass reduces roller friction for energy-saving continuous operation
- Custom cover rubber: abrasion-resistant, heat-resistant options for longer service life
Qingdao Best Friend Rubber & Plastic Co., Ltd. is one of the most reliable manufacturers and suppliers of cfw conveyor belt in China, also supports customized service. If you're going to buy high quality cfw conveyor belt made in China, welcome to get more information from our factory.
Product Overview
CFW conveyor belt(Crows-Foot Weave conveyor belt) is a heavy-duty textile-reinforced rubber belt engineered for operational sites prone to ripping and heavy impact. Its carcass adopts a unique 2/2 broken-twill textile weave layout with a redesigned yarn crossing distribution that mitigate localized stress concentration that plagues conventional EP and plain-weave belts.
Unlike general-purpose conveyor belts optimized purely for flexibility, CFW carcass prioritizes cross-directional toughness to resist piercing, crack propagation and heavy drop impacts when transporting angular, lumpy bulk solids. This high-performance belt serves as an upgraded alternative for operations suffering frequent premature belt failures caused by longitudinal tears.


Core Product Advantages
1.Enhanced cross-directional toughness against tear-propagation
The special broken-twill weaving delivers drastically elevated weft-direction strength. When sharp ore fragments puncture the belt surface, the carcass restricts crack spreading along the running direction, greatly lowering the probability of catastrophic longitudinal ripping failures.
2.Stable dimensional performance under sustained tension
Minimal operational stretch occurs under continuous dynamic loads. The belt maintains consistent running length, reducing frequent adjustments for take-up assemblies. It helps mitigate common operating faults including belt sag and track deviation.
3.Reduced running friction for lower power consumption
The optimized textile weave flattens the inner carcass surface. Decreased rolling friction against idler sets cuts driving power draw, generating measurable energy savings over long-term continuous production cycles.
4.Superior rubber-fabric interlayer bonding performance
The irregular textured weave profile delivers an enlarged bonding contact area between the textile carcass and rubber layers. It firmly blocks risks of delamination, blistering and rubber peeling even under cyclic heavy impact loading.
5.Custom-tunable cover rubber compounds
Matching cover rubber formulas (abrasion-resistant, heat-resistant etc.) can be selected to suit different working environments to further lengthen overall belt service cycles.
Technical Parameter Table
|
Type |
|
Tensile at Break (N/mm) |
Elongation at Break (%) |
|
EP200-CFW |
Warp |
240 |
≥14 |
|
Weft |
75 |
≤40 |
|
|
EP250-CFW |
Warp |
300 |
≥14 |
|
Weft |
90 |
≤45 |
|
|
EP300-CFW |
Warp |
350 |
≥14 |
|
Weft |
105 |
≤45 |
|
|
EP350-CFW |
Warp |
410 |
≥14 |
|
Weft |
115 |
≤45 |
|
|
EP400-CFW |
Warp |
480 |
≥14 |
|
Weft |
115 |
≤45 |
|
|
EP450-CFW |
Warp |
520 |
≥14 |
|
Weft |
115 |
≤45 |
|
|
EP500-CFW |
Warp |
610 |
≥14 |
|
Weft |
115 |
≤40 |
Application Scenarios
1.Underground & Open-pit Mining Operations
Long conveyors run through hard-to-access routes where sharp ore cuts into the belt. The crows-foot weave acts as a rip-stop barrier, containing small slits so they don't propagate into full-length tears - minor damage stays repairable instead of forcing emergency shutdowns.
2.Quarrying and Cement Manufacturing Sites
Quarry and cement plants operate continuously with high-temperature conveyed materials and only limited scheduled maintenance time. The enhanced rubber-fabric bonding of CFW conveyor belt resists delamination under sustained high-temperature material loads, avoiding unplanned shutdowns caused by layer separation between cover rubber and carcass.
3.Crushing & Aggregate Processing Plants
Crusher discharge points feature frequent high-speed projectile impacts. The improved weft-direction toughness absorbs concentrated instantaneous shock loads, stopping sharp fragments from punching clean holes through the belt carcass right at the impact zone.
4.Bulk Port Stockyards & Material Terminals
Port conveyors frequently start, stop and reverse under fluctuating bulk loads. Low permanent elongation keeps the belt length consistent, so tracking and take-up settings stay stable even after weeks of non-stop cyclic operation, cutting daily adjustment labour.
FAQ
Q: What does CFW stand for, and how does its internal weave differ from regular textile belts?
A:CFW is short for Crows-Foot Weave, another technical name is 2/2 broken-twill weave. It rearranges warp-weft crossover points inside the fabric carcass, distributing external impact force more evenly instead of concentrating stress at limited yarn intersection spots.
Q: When should site operators pick CFW conveyor belt rather than standard EP conveyor belts?
A:Select CFW if your site faces recurring longitudinal-tear risks, large-size lumpy feedstock, sharp-edged fragments and heavy drop impacts. Standard EP belts remain a cost-effective solution for general-condition conveying where tearing risk stays low and high flexibility / excellent troughing performance is prioritized.
Q: What is the main advantage of CFW belt compared with ordinary canvas belt?
A:Built with a 2/2 broken twill weave, the CFW belt optimizes yarn crossover layout to make full use of fibre strength. It offers over 5× higher weft strength than regular canvas belts, bringing superior tear and impact resistance for tough mining and quarry applications.
Q: Will CFW belts completely eliminate all tearing risks on-site?
A:CFW greatly raises anti-tear performance and restricts crack expansion, but cannot fully prevent damage caused by extremely sharp metal foreign objects or severe mechanical jamming. Standard pre-use inspection and foreign-body removal procedures are still suggested.
Q: What factors influence CFW belt service lifetime in real-world operation?
A:Feed material sharpness, drop height at transfer points, idler roller condition, tension adjustment and cover-rubber grade all affect service cycles. Proper installation and routine inspection help achieve expected service life.
Hot Tags: cfw conveyor belt, China cfw conveyor belt manufacturers, suppliers, factory
Previous
No InformationYou Might Also Like
Send Inquiry











